Hand Turned Switch Top for the F/A-18C Launch Bar in the shop.

You find it here: F/A-18C Launch Bar Switch Top

A-10C Right and Left Consoles PreCut

I have news about the A-10C Consoles.

Both Consoles accually done, and are ready to get shipped out to whoever would be interested.

HOWEVER… The price for shipping large heavy packages like this to USA, used to be very low, and a Package with both Consoles, Lasercut in 6mm MDF including the Glue needed for assembly, would normally have cost 300 DKK for a package at 20 Kg.

But after January 1. 2018, that price is going up by quite alot, and will be 828,25 DKK for exactly the same. i can only guess the reason for this is the current covernment in the US, since America is the only country which gets a higher price.

So, if you live in USA, and you are interested in our precut Consoles, you can order them from me from today, and until December 18. and then only pay the 300 DKK shipping price.

The Precut Package is 1200DKK until December 18.
And that includes shipping.

What do you get:
—————–
A-10C Right Console Lasercut in 6mm MDF ready for Assembly.
A-10C Left Console Lasercut in 6mm MDF ready for Assembly.
Glue for assembling both Consoles.

All the Console parts will have Labels on them, so its clear which way they need to sit, and i will be making a Video or Picture page to show how to assemble and glue it all.

The 3D printed DZUS Rails which can be mounted on these will be released not long after, and can then be ordered. However its totally possible to make your own wooden rails, and drill holes for the panels if one would like.
The same goes for the Warthog Throttle Mount.

THIS IS ONLY FOR YOU GUYS LIVING IN THE US, the rest of the world can ofcourse also purchase these, but that price remains the same.

After January 1. these packages will cost a total of 1728 DKK for everyone living in the US. We are trying to get a better deal on shipping, but it seems like its not possible. So this might be the only chance to get them at low price if your Interested.

You can write me an email on info@lynx.dk if your interested.

Or you can order directly here: SHOP

The Picture shows only the Right console and the Glue. It will assemble into this: Consoles

Update 2017.

Panels
——

The site have been pretty silent the first months in 2017 and until now, but that dosnt mean things have been at a stand still.

Quite a few things have happened, and we will in this Update mention a few of them.

One of the biggest things we have been working on, is the panels. We didnt like the Grayish Engraved letters and wanted to improve, so they would look like the real panels, and with the Backlight just right too. And that included the CUB Panels too.
That means that quite a few test have been made before we ended up with the perfect result, in both Engravings look and nice even backlight.

The way the panels are made make them a little bit more expensive than first anticipated due to more CNC time and more painting, however the result are stunning with the white Engravings in contrast to the black panel, and definately worth it.
The picture above shows the ELEC panel, and its being lit by 3 LED strips, with 6 LED in each. we will then offer a Casing box for each panel, which fits the individual panel and have room for installing LED Strips, and connectors for that.

This means that now we are working on designing the rest of the panels for the A-10C, and then follows the HUEY and F-16.

A-10C Console
————-

One of the other things we have worked on was the Right Console for the A-10C, which will end up with Plans that can be freely downloadet.
But we will also be selling precut MDF Sheets for the Console.
The console are in the final stage of testing, which means that it will soon be released, and shortly after the Left Console will follow.

Cockpit Utility Brick (CUB)
—————————

The CUB further development have been at a stand still, since we wanted to get the Panels right before we would carry on. However, the Backlight Dimmer Attachment for the CUB’s are close to a prototype, and then we will show pictures here in the News Section.

The CUB 1 DIY Version are also being released soon, we are working on a detailed Guide on howto assemble it.

The CUB 2 which will have either rotary encoders are also close to be prototyped, allthi there are many more wires and alot of soldering in that version, so its a little more complicated than the CUB 1. And the DIY Version will require Soldering.

A-10C UFC & CDU
—————

The CDU and the UFC for the A-10C is also one of the things that we have been working on, and we are slowly getting closer to a good result.
We cant show better pictures than we allready have done, but right now we are working on getting the Backlight diffused into the buttons so it looks nice and even.

The buttons engravings where also graysih before, and the final version of these 2 units, will have the buttons made like the new panels, so we end up with nice white engravings.

———————————–

So we have many things in the works at the moment, but we are doing our best to get them finished for you guys.

Best Regards.
Lynx.dk

Plug And Play Button Boxes Cockpit Utility Brick is now for sale. The 3 main features is these:
1: Its the same size as a Warthog Throttle
2: It have backlit Panels
2: Panels can be swapped out in seconds.
 
See them here: CUB’s

Different swappable panels can be found here: CUB Panels

The CUB Switches can be programmed to use with every game outthere.
That means that every switch can be programmed as ON-ON, or ON-OFF, and the same with ON-OFF-ON switches, they can act as ON-ON-ON
That option along with the possebility to save 4 switch setups in the units Arduino, give you a solid Button Box that can be used for many Games/Planes.
Check out how to program the CUB here: CUB 1 Programming Guide

More info will follow soon, check the gallery here: Gallery

We are starting to add Electronics to the shop.

At the moment we can only offer Switches, but later on more products will be available.